GE F20T12BL - 10244

Features

• General Electric F20T12/BL Black Light Bulb
• Linear Fluorescent White Tube
• TCLP Compliant

• The F20T12BL GE fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the GE F20T12BL lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the F20T12BL GE.
• The GE F20T12BL lamps are very fragile. Do not drop, crush, bend or shake them.
• The F20T12BL GE fluorescent tubes may shatter with considerable force when broken.
• To ensure that the GE F20T12BL lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the F20T12BL GE lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate GE F20T12BL lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the F20T12BL GE lamp holders and sockets when needed.
• Affix the GE F20T12BL lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• F20T12BL GE fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the GE F20T12BL starting, lamp life and lumen maintenance.