Philips PL-S 9W/2P BLB - 157529

Applications

• Graphic Arts
• Lacquer Curing
• Insect Traps

Features

• Philips PLS 9W/2P BLB CFL Lamp
• PLS 2-Pin Blacklight Blue
• UVA Lamp
• 365NM Peak
• Lead Free
• PL-S 9W/08 2P
• Previous Code 20678-9

• The PL-S 9W/2P BLB Philips fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the Philips PL-S 9W/2P BLB lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the PL-S 9W/2P BLB Philips.
• The Philips PL-S 9W/2P BLB lamps are very fragile. Do not drop, crush, bend or shake them.
• The PL-S 9W/2P BLB Philips fluorescent tubes may shatter with considerable force when broken.
• To ensure that the Philips PL-S 9W/2P BLB lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the PL-S 9W/2P BLB Philips lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate Philips PL-S 9W/2P BLB lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the PL-S 9W/2P BLB Philips lamp holders and sockets when needed.
• Affix the Philips PL-S 9W/2P BLB lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• PL-S 9W/2P BLB Philips fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the Philips PL-S 9W/2P BLB starting, lamp life and lumen maintenance.