Sylvania CF7DS/E/841 ECO - 20316

Applications

• Facilities
• Retail Display
• Hospitality
• Office
• Restaurant
• Warehouse

Features

• Sylvania CF7DS/E/841 Compact Fluorescent Lamp
• Dulux S/E 4-Pin Single Tube Bulb for use with Dimming or Electronic Ballast
• EOL Protection

• The CF7DS/E/841 ECO Sylvania fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the Sylvania CF7DS/E/841 ECO lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the CF7DS/E/841 ECO Sylvania.
• The Sylvania CF7DS/E/841 ECO lamps are very fragile. Do not drop, crush, bend or shake them.
• The CF7DS/E/841 ECO Sylvania fluorescent tubes may shatter with considerable force when broken.
• To ensure that the Sylvania CF7DS/E/841 ECO lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the CF7DS/E/841 ECO Sylvania lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate Sylvania CF7DS/E/841 ECO lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the CF7DS/E/841 ECO Sylvania lamp holders and sockets when needed.
• Affix the Sylvania CF7DS/E/841 ECO lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• CF7DS/E/841 ECO Sylvania fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the Sylvania CF7DS/E/841 ECO starting, lamp life and lumen maintenance.