Ushio BAB - 1000000

Lamp BAB (JR12V-20W/FL36)
Description 12V 20W 2-Pin (GU5.3) 36° MR16
Brand Ushio
MPN 1000000
UPC 048777100004


Discontinued Product
9 In Stock

In Stock

The BAB Ushio 1000000 is a Halogen MR16 12V 20W Lamp with a GU5.3 base.
Specifications for the 1000000 Ushio BAB Replacement Lamp
Shape MR16
Lamp Base GU5.3 (2-Pin, Round Pins)
Filament C-8
Bulb Finish Clear
Rated Life 5000 hours
Operating Position Universal
Beam Spread 36°
Beam Type Flood
Color Temperature 2950 K
Candle Power (CP) 600
Watts 20 W
Volts 12 V
Maximum Overall Length - MOL 1.77in (44.90mm)
Diameter 2.00in (50.80mm)
Product Code 1000000
Family Name Ushio MR-16 JR 12V Eurostar Series
Description BAB
Ordering Code JR12V-20W/FL36
SKU Qty 1
SKU / Case Qty 50
Case Qty (Price Listed is Per Bulb) 50
Sales Unit Each
UPC 048777100004
Ushio BAB 1000000 Replacement Bulb Applications & Features


  • Retail Display
  • Museums & Galleries
  • Office & Commercial
  • Hotels & Restaurants
  • Track & Accent Lighting


  • Ushio BAB (JR12V-20W/FL36) Halogen Bulb
  • Eurostar MR16 Lamp
  • Consistent Color
  • Titanium Oxide Coated Reflector
  • Axial Filament
  • Integrated UV Protection
  • Dimmable
  • Precisely Focused Light Cone
  • Cool Beam Effect
  • Dichroic MR16 Lamp for General Lighting
  • Only for Use in Approved Halogen Fixtures
  • FOS-5
Ushio BAB 1000000 Replacement Lamp


  • Altman ZS-3 Zip Strip Borderlights
  • Altman MF Micro Flood
BAB Ushio Halogen Lamp

  • DANGER! The Ushio BAB JR12V-20W/FL36 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio BAB replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JR12V-20W/FL36 BAB Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio BAB bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the BAB Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio BAB lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio BAB lamp.
  • Affix the BAB Ushio replacement lamp securely in the socket. Improper installation of the Ushio BAB replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio BAB lamp seal below 350C.
  • Keep the temperature of the BAB Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio BAB JR12V-20W/FL36 lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio BAB replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio BAB JR12V-20W/FL36 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.