Ushio J12V-150WA/80 - 1001734

Lamp J12V-150WA/80
Description 12V 150W RSC (R7s) T4 Clear
Brand Ushio
MPN 1001734
UPC 048777210468


The J12V-150WA/80 Ushio 1001734 is a Halogen T4 12V 150W Lamp with a R7s base.
Specifications for the 1001734 Ushio J12V-150WA/80 Replacement Lamp
Shape T4
Lamp Base R7s (Recessed Single Contact)
Filament C-8
Bulb Finish Clear
Rated Life 2000 hours
Operating Position Horiz ±4°
Initial Lumens 2700
Watts 150 W
Volts 12 V
Maximum Overall Length - MOL 3.37in (85.50mm)
Diameter 0.47in (11.90mm)
Product Code 1001734
Family Name Ushio J Series Double Ended Quartz Halogen Lamps
Description J12V-150WA/80
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 50
Sales Unit Each
UPC 048777210468
Ushio J12V-150WA/80 1001734 Replacement Bulb Applications & Features


  • Ushio J12V150WA80 Clear Halogen Bulb
  • Double Ended Lamp
  • Only for Use in Approved Enclosed Halogen Fixtures
J12V-150WA/80 Ushio Halogen Lamp

  • DANGER! The Ushio J12V-150WA/80 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio J12V-150WA/80 replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the J12V-150WA/80 Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio J12V-150WA/80 bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the J12V-150WA/80 Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio J12V-150WA/80 lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio J12V-150WA/80 lamp.
  • Affix the J12V-150WA/80 Ushio replacement lamp securely in the socket. Improper installation of the Ushio J12V-150WA/80 replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio J12V-150WA/80 lamp seal below 350C.
  • Keep the temperature of the J12V-150WA/80 Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio J12V-150WA/80 lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio J12V-150WA/80 replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio J12V-150WA/80 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.