GE FC12T9/CW - 33890

Applications

• Office
• Utility

Features

• General Electric FC12T9CW Cool White 32 Circline
• 98040

• The FC12T9/CW GE fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the GE FC12T9/CW lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the FC12T9/CW GE.
• The GE FC12T9/CW lamps are very fragile. Do not drop, crush, bend or shake them.
• The FC12T9/CW GE fluorescent tubes may shatter with considerable force when broken.
• To ensure that the GE FC12T9/CW lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the FC12T9/CW GE lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate GE FC12T9/CW lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the FC12T9/CW GE lamp holders and sockets when needed.
• Affix the GE FC12T9/CW lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• FC12T9/CW GE fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the GE FC12T9/CW starting, lamp life and lumen maintenance.