GE FC8T9/D - 11026

Features

• General Electric FC8T9D Daylight Fluorescent

• The FC8T9/D GE fluorescent lamps operate at high surface temperatures that can cause serious physical injuries.
• Turn power off and allow adequate time (approximately 10 minutes) for the GE FC8T9/D lamp to cool before attempting replacement.
• In order to avoid the risk of electrical shock, make sure the power to the fixture is turned off when replacing the FC8T9/D GE.
• The GE FC8T9/D lamps are very fragile. Do not drop, crush, bend or shake them.
• The FC8T9/D GE fluorescent tubes may shatter with considerable force when broken.
• To ensure that the GE FC8T9/D lamps remain in the sockets for the duration of the operation, make sure that the fixture’s sockets are not worn prior to installation of the lamps.
• If the FC8T9/D GE lamps are installed in worn sockets, the lamps could fall out of the fixture during operation.
• Never operate GE FC8T9/D lamp above or below its rated current voltage.
• Electrical connections should be clean and in good condition. Replace the FC8T9/D GE lamp holders and sockets when needed.
• Affix the GE FC8T9/D lamp securely in the socket. Improper installations will cause electrical arcing, overheating and short life to the lamp and socket.
• Do not look directly at the operating lamp for any period of time; this may cause serious eye injury.
• FC8T9/D GE fluorescent lamp use is not recommended in extreme weather conditions.
• Excessive cold/warm temperatures dramatically affects the GE FC8T9/D starting, lamp life and lumen maintenance.