M-F 8AM-4:30PM CT
1-800-582-8828
Halco 7.5SCR - 7019
The 7.5SCR Halco 7019 is an Incandescent S11 130V 7.5W Ceramic Red Lamp with an E26 base.
Specifications for the 7019 Halco 7.5SCR Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | S11 |
| Lamp Base | E26 (Medium Screw) |
| Filament | C-7A |
| Bulb Finish | Ceramic Red |
| Rated Life | 1500 hours |
| PHOTOMETRIC CHARACTERISTICS |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 7.5 W |
| Volts | 130 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 2.25in (57.20mm) |
| PRODUCT INFORMATION | |
| Product Code | 7019 |
| Family Name | General Service S11 |
| Description | 7.5SCR |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 25 |
| Sales Unit | Each |
7.5SCR Halco Incandescent Lamp
- DANGER! The 7.5SCR Halco replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Do not use the 7.5SCR Halco replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Halco 7.5SCR bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Never touch the 7.5SCR Halco lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Halco 7.5SCR lamp.
- Affix the 7.5SCR Halco replacement lamp securely in the socket. Improper installation of the Halco 7.5SCR replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Halco 7.5SCR replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Halco 7.5SCR replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.