Halco 20T6.5CL/INT - 9019

Features

• Halco T6.5CL20INT Clear Tubular Lamp

• DANGER! The 20T6.5CL/INT Halco replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Do not use the 20T6.5CL/INT Halco replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Halco 20T6.5CL/INT bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Never touch the 20T6.5CL/INT Halco lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Halco 20T6.5CL/INT lamp.
• Affix the 20T6.5CL/INT Halco replacement lamp securely in the socket. Improper installation of the Halco 20T6.5CL/INT replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Halco 20T6.5CL/INT replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Halco 20T6.5CL/INT replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.