Osram 64624 - 54125

Applications

• Dental

Features

• Osram 64624 Halogen Bulb
• MR11 Lamp
• Dichroic Coating on Reflector
• Working Distance 26mm

Equipment

• LD Caulk Prismetics Lite
• LD Caulk 644358
• Demetron 20919
• Demetron Optilux 50
• Demetron Optilux 150
• Den-Mat 3961
• Den-Mat Ceri Light
• FARO P287 Polymerizing Lamp
• Henry Schein 100-5657
• Henry Schein VCL300
• Kinetic Instruments 1511
• Kinetic Instruments Sunspot
• Kulzer 2244
• Kulzer Translux CL
• Mission White Profile Curing Lite
• Pro Den 20-055
• Pro Den Executor
• Teledyne Getz 4501
• Teledyne Getz Focus Activator

• DANGER! The Osram 64624 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Osram 64624 replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the 64624 Osram replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Osram 64624 bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the 64624 Osram replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Osram 64624 lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Osram 64624 lamp.
• Affix the 64624 Osram replacement lamp securely in the socket. Improper installation of the Osram 64624 replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Osram 64624 lamp seal below 350C.
• Keep the temperature of the 64624 Osram replacement lamp wall above 250C.
• Keep the temperature of the Osram 64624 lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Osram 64624 replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Osram 64624 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.