Philips EFR - 314906

Applications

• Dental
• Fiber Optics
• Microscope
• Ophthalmic

Features

• Philips Type 6423FO EFR Halogen Lamp 31490-6
• Low Voltage MR16 Fibre Optic Bulb
• Replacement Bulb for ZB-EFR & LL-EFR

Equipment

• Bosworth 92102 Superlight
• Volpi 10001-111 Fiber Optic Illuminator
• Coe Lite 4070110
• Fuji DentaCam 2 Intraoral Imaging
• Fuji DentaCam 11 Extraoral Imaging
• Fuji DentaCam 50 Intraoral Imaging
• Fuji DentaCam 100 Intraoral Imaging
• Healthco HCOB400711 High Intensity VLC Unit
• Kowa ASL3CBA26 Slit Lamp SL-2
• Kulzer 2245 Translux 2
• Kulzer 2245 Translux EC
• Litema Pluraflex HL150
• Luxtec ACO Series Fiber Optic Illuminator 8000
• Olympus 8-S401 OME Microscope Illuminator
• Olympus 8-S401 OCS-2 Microscope Illuminator
• Olympus CLE-10 Endoscope/GI
• Olympus 58102 Microscope Illuminator
• Marco OM 2020 Operation Microscope Main OM2000
• Olympus 8-S401 OCS Microscope Illuminator
• Olympus CLK-3 Sigmoidoscope/GI
• Shin-Nippon OP-2 Microscope Illuminator
• Topcon 41107-50130 Microscope
• Topcon Microscope Main Bulb OM-5
• Vivadent 7110 Heliomat
• Zeiss 31-01-98 Microscope Illuminator
• Wild Leitz 997-053 Microscope Illuminator
• American DJ Deco Fx
• American DJ Dynasty Ray
• American DJ Dynasty Scan
• American DJ Fire Burst DMX
• American DJ Hyper Fx
• American DJ Quick Scan
• American DJ Trance Wheel
• American DJ Warp Fx
• American DJ Whirl

• DANGER! The Philips EFR 6423FO replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Philips EFR replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the 6423FO EFR Philips replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Philips EFR bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EFR Philips replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Philips EFR lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Philips EFR lamp.
• Affix the EFR Philips replacement lamp securely in the socket. Improper installation of the Philips EFR replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Philips EFR lamp seal below 350C.
• Keep the temperature of the EFR Philips replacement lamp wall above 250C.
• Keep the temperature of the Philips EFR 6423FO lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Philips EFR replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Philips EFR 6423FO replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.