M-F 8AM-4:30PM CT
1-800-582-8828
Philips ESA/FHD - 261263
| Lamp | ESA/FHD (7387) |
| Description | 6V 10W 2-Pin (G4) M29 410276 |
| Brand | Philips |
| MPN | 261263 |
| UPC | 871150041027 |
The ESA/FHD Philips 26126-3 is a Halogen T2.5 6V 10W Lamp with a G4 base.
Specifications for the 261263 Philips ESA/FHD Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | T2.5 |
| Lamp Base | G4 (Miniature 2-Pin) |
| Filament | C-6 |
| Bulb Finish | Clear |
| Rated Life | 100 hours |
| Light Center Length - LCL | 0.77in (19.60mm) |
| Operating Position | Universal |
| PHOTOMETRIC CHARACTERISTICS | |
| Initial Lumens | 200 |
| Color Temperature | 3200 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 10 W |
| Volts | 6 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 1.18in (30.00mm) |
| PRODUCT INFORMATION | |
| Product Code | 261263 |
| Family Name | Philips Projection Lamps |
| Description | ESA/FHD |
| Ordering Code | 7387 |
| LIF | M29 |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 100 |
| Sales Unit | Each |
| UPC | 871150041027 |
Philips ESA/FHD 261263 Replacement Bulb Applications & Features
Applications
- Projection Lamp
Features
- Philips Type 7387 ESA/FHD Halogen Bulb 26126-3
- Single Ended Lamp
- 7387 ESA FHD
Philips ESA/FHD 261263 Replacement Lamp
Equipment
- AO Reichert 655C Microscope
- AO Reichert 624/AO Lensometer
- Leica 050-550 Microscope
- Leica 050-556 Microscope
- Leica Laborlux 11 Microscope
- Leica 907-090 Microscope
- Nikon 76342 Microscope
ESA/FHD Philips Halogen Lamp
- DANGER! The Philips ESA/FHD 7387 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Philips ESA/FHD replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the 7387 ESA/FHD Philips replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Philips ESA/FHD bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the ESA/FHD Philips replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Philips ESA/FHD lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Philips ESA/FHD lamp.
- Affix the ESA/FHD Philips replacement lamp securely in the socket. Improper installation of the Philips ESA/FHD replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Philips ESA/FHD lamp seal below 350C.
- Keep the temperature of the ESA/FHD Philips replacement lamp wall above 250C.
- Keep the temperature of the Philips ESA/FHD 7387 lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Philips ESA/FHD replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Philips ESA/FHD 7387 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.