Sylvania ESS - 58720

Applications

• Stage & Studio

Features

• Ecologic
• Sylvania 250Q/CL/DC(ESS) Lamp
• Super Q Tungsten Halogen Light Bulb
• Single Ended Lamp
• Replacement Lamp for Modeling Light
• Bulb Must be used in a Fixture that has a Suitable Protective Shield and/or Screening Technique to Protect People and Surroundings Against the Risk of Personal Injury and/or Property Damage from the Bulb Shattering and UV Exposure

• DANGER! The Sylvania ESS 250Q/CL/DC replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Sylvania ESS replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the 250Q/CL/DC ESS Sylvania replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Sylvania ESS bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the ESS Sylvania replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Sylvania ESS lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Sylvania ESS lamp.
• Affix the ESS Sylvania replacement lamp securely in the socket. Improper installation of the Sylvania ESS replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Sylvania ESS lamp seal below 350C.
• Keep the temperature of the ESS Sylvania replacement lamp wall above 250C.
• Keep the temperature of the Sylvania ESS 250Q/CL/DC lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Sylvania ESS replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Sylvania ESS 250Q/CL/DC replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.