M-F 8AM-4:30PM CT
1-800-582-8828
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA


Ushio BRL - 1000071

Ushio
Lamp BRL (JC12V-50W)
Description 12V 50W 2-Pin (G6.35) Clear
Brand Ushio
MPN 1000071
UPC 048777104620

$8.24

The BRL Ushio 1000071 is a Halogen T3.5 12V 50W Lamp with a G6.35 base.
Specifications for the 1000071 Ushio BRL Replacement Lamp
GENERAL CHARACTERISTICS
Shape T3.5
Lamp Base G6.35 (Glass 2-Pin)
Filament CBar6
Bulb Finish Clear
Rated Life 50 hours
Light Center Length - LCL 1.17in (30.00mm)
Operating Position BD/Hor
PHOTOMETRIC CHARACTERISTICS
Initial Lumens 1600
Color Temperature 3400 K
ELECTRICAL CHARACTERISTICS
Watts 50 W
Volts 12 V
DIMENSIONS
Maximum Overall Length - MOL 1.73in (44.00mm)
Diameter 0.45in (11.50mm)
PRODUCT INFORMATION
Product Code 1000071
Family Name Ushio JC Series Halogen Low Voltage Bi-Pin Lamps
Description BRL
Ordering Code JC12V-50W
LIF A1/220
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 10
Sales Unit Each
UPC 048777104620
Ushio BRL 1000071 Replacement Bulb Applications & Features

Applications

  • Medical
  • Microscope
  • Night Club
  • Ophthalmic
  • Projection


Features

  • Ushio BRL (JC12V-50W) Halogen Bulb
  • Single Ended Lamp
  • Only for Use in Approved Enclosed Halogen Fixtures
Ushio BRL 1000071 Replacement Lamp

Equipment

  • Visual Effects V-9411 Goddess
BRL Ushio Halogen Lamp

  • DANGER! The Ushio BRL JC12V-50W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio BRL replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JC12V-50W BRL Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio BRL bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the BRL Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio BRL lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio BRL lamp.
  • Affix the BRL Ushio replacement lamp securely in the socket. Improper installation of the Ushio BRL replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio BRL lamp seal below 350C.
  • Keep the temperature of the BRL Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio BRL JC12V-50W lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio BRL replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio BRL JC12V-50W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.