M-F 8AM-4:30PM CT
1-800-582-8828
Ushio DYS/5 - 1000252
| Lamp | DYS/5 (JCD125V-600WC) |
| Description | 125V 600W 2-Pin Pf (GY9.5) Clear |
| Brand | Ushio |
| MPN | 1000252 |
| UPC | 048777116173 |
The DYS/5 Ushio 1000252 is a Halogen G7 125V 600W Lamp with a GY9.5 base.
Specifications for the 1000252 Ushio DYS/5 Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | G7 |
| Lamp Base | GY9.5 (2-Pin Prefocus) |
| Filament | CC-6 |
| Bulb Finish | Clear |
| Rated Life | 150 hours |
| Light Center Length - LCL | 1.42in (36.50mm) |
| Operating Position | BD/Hor |
| PHOTOMETRIC CHARACTERISTICS | |
| Initial Lumens | 13750 |
| Color Temperature | 3200 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 600 W |
| Volts | 125 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 2.48in (63.00mm) |
| Diameter | 0.87in (22.00mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000252 |
| Family Name | Ushio JCD Series Halogen Bi-Pin SSTV & AV Lamps |
| Description | DYS/5 |
| Ordering Code | JCD125V-600WC |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777116173 |
Ushio DYS/5 1000252 Replacement Bulb Applications & Features
Applications
- Projection
- Microfilm
- Stage Studio
Features
- Ushio DYS-5 (JCD125V-600WC) Halogen Bulb
- Single Ended Lamp
- Only for Use in Approved Enclosed Halogen Fixtures
DYS/5 Ushio Halogen Lamp
- DANGER! The Ushio DYS/5 JCD125V-600WC replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio DYS/5 replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JCD125V-600WC DYS/5 Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio DYS/5 bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the DYS/5 Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio DYS/5 lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio DYS/5 lamp.
- Affix the DYS/5 Ushio replacement lamp securely in the socket. Improper installation of the Ushio DYS/5 replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio DYS/5 lamp seal below 350C.
- Keep the temperature of the DYS/5 Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio DYS/5 JCD125V-600WC lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio DYS/5 replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio DYS/5 JCD125V-600WC replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.