M-F 8AM-4:30PM CT
1-800-582-8828
Ushio DYS - 1000251
| Lamp | DYS (JCD120V-600WC) |
| Description | 120V 600W 2-Pin Pf (GY9.5) Clear |
| Brand | Ushio |
| MPN | 1000251 |
| UPC | 048777116104 |
The DYS Ushio 1000251 is a Halogen G7 120V 600W Lamp with a GY9.5 base.
Specifications for the 1000251 Ushio DYS Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | G7 |
| Lamp Base | GY9.5 (2-Pin Prefocus) |
| Filament | CC-6 |
| Bulb Finish | Clear |
| Rated Life | 75 hours |
| Light Center Length - LCL | 1.44in (36.50mm) |
| Operating Position | BD/Hor |
| PHOTOMETRIC CHARACTERISTICS | |
| Initial Lumens | 17000 |
| Color Temperature | 3200 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 600 W |
| Volts | 120 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 2.48in (63.00mm) |
| Diameter | 0.87in (22.00mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000251 |
| Family Name | Ushio JCD Series Halogen Bi-Pin SSTV & AV Lamps |
| Description | DYS |
| Ordering Code | JCD120V-600WC |
| LIF | A1/264 |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777116104 |
Ushio DYS 1000251 Replacement Bulb Applications & Features
Applications
- Projection
- Stage Studio
Features
- Ushio DYS (JCD120V-600WC) Halogen Bulb
- DYS 600
- Single Ended Lamp
- Replacement for ZB-DYS
- Only for Use in Approved Enclosed Halogen Fixtures
Ushio DYS 1000251 Replacement Lamp
Equipment
- Raykit PAR56 & PAR64
- Mole-Richardson Molequartz Teenie-Weenie Mole
- Times Square Cabaret 601S Followspot
DYS Ushio Halogen Lamp
- DANGER! The Ushio DYS JCD120V-600WC replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio DYS replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JCD120V-600WC DYS Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio DYS bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the DYS Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio DYS lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio DYS lamp.
- Affix the DYS Ushio replacement lamp securely in the socket. Improper installation of the Ushio DYS replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio DYS lamp seal below 350C.
- Keep the temperature of the DYS Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio DYS JCD120V-600WC lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio DYS replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio DYS JCD120V-600WC replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.