M-F 8AM-4:30PM CT
1-800-582-8828
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA


Ushio DZA - 1000254

Ushio
Lamp DZA (JC10.8V-30W)
Description 10.8V 30W 2-Pin (G5.3) Clear
Brand Ushio
MPN 1000254
UPC 048777116319

$23.43

The DZA Ushio 1000254 is a Halogen T3.5 10.8V 30W Lamp with a G5.3 base.
Specifications for the 1000254 Ushio DZA Replacement Lamp
GENERAL CHARACTERISTICS
Shape T3.5
Lamp Base G5.3 (Miniature 2-Pin)
Filament C-6
Bulb Finish Clear
Rated Life 400 hours
Light Center Length - LCL 1.06in (27.00mm)
PHOTOMETRIC CHARACTERISTICS
Initial Lumens 600
Color Temperature 3100 K
ELECTRICAL CHARACTERISTICS
Watts 30 W
Volts 10.8 V
DIMENSIONS
Maximum Overall Length - MOL 2.01in (51.00mm)
Diameter 0.45in (11.50mm)
PRODUCT INFORMATION
Product Code 1000254
Family Name Ushio JC Series Halogen Low Voltage Bi-Pin Lamps
Description DZA
Ordering Code JC10.8V-30W
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 10
Sales Unit Each
UPC 048777116319
Ushio DZA 1000254 Replacement Bulb Applications & Features

Applications

  • Projection
  • Microfilm
  • Stage Studio


Features

  • Ushio DZA (JC10.8V-30W) Halogen Bulb
  • Single Ended Lamp
  • Only for Use in Approved Enclosed Halogen Fixtures
DZA Ushio Halogen Lamp

  • DANGER! The Ushio DZA JC10.8V-30W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio DZA replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JC10.8V-30W DZA Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio DZA bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the DZA Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio DZA lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio DZA lamp.
  • Affix the DZA Ushio replacement lamp securely in the socket. Improper installation of the Ushio DZA replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio DZA lamp seal below 350C.
  • Keep the temperature of the DZA Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio DZA JC10.8V-30W lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio DZA replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio DZA JC10.8V-30W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.