M-F 8AM-4:30PM CT
1-800-582-8828
> >>EHD
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA

Ushio EHD - 1000287

EHD
Ushio
Lamp EHD (JCV120V-500WBH)
Description 120V 500W 2-Pin (G9.5) 3000K
Brand Ushio
MPN 1000287
UPC 048777118627

$16.20

In Stock

The EHD Ushio 1000287 is a Halogen 120V 500W Lamp with a G9.5 base.
Specifications for the 1000287 Ushio EHD Replacement Lamp
GENERAL CHARACTERISTICS
Lamp Base G9.5 (Medium 2-Pin)
Filament CC-8
Bulb Finish Clear
Rated Life 2000 hours
Light Center Length - LCL 2.37in (60.30mm)
Operating Position Universal
PHOTOMETRIC CHARACTERISTICS
Initial Lumens 10000
Color Temperature 3000 K
ELECTRICAL CHARACTERISTICS
Watts 500 W
Volts 120 V
DIMENSIONS
Maximum Overall Length - MOL 3.94in (100.10mm)
Diameter 0.53in (13.50mm)
PRODUCT INFORMATION
Product Code 1000287
Family Name Ushio JCV Series Single Ended 2-Pin Base Tungsten Halogen Lamps
Description EHD
Ordering Code JCV120V-500WBH
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 10
Sales Unit Each
UPC 048777118627
Ushio EHD 1000287 Replacement Bulb Applications & Features

Applications

  • Stage Studio
  • Theatre
  • TV
  • Video


Features

  • Ushio EHD (JCV120V-500WBH) Halogen Bulb
  • Single Ended Lamp
  • Ceramic Base
  • Colortran 176-031
  • Only for Use in Approved Enclosed Halogen Fixtures
Ushio EHD 1000287 Replacement Lamp

Equipment

  • Altman 3.5Q-MT-12 Ellipsoidal
EHD Ushio Halogen Lamp

  • DANGER! The Ushio EHD JCV120V-500WBH replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio EHD replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JCV120V-500WBH EHD Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio EHD bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EHD Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio EHD lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EHD lamp.
  • Affix the EHD Ushio replacement lamp securely in the socket. Improper installation of the Ushio EHD replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio EHD lamp seal below 350C.
  • Keep the temperature of the EHD Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio EHD JCV120V-500WBH lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio EHD replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio EHD JCV120V-500WBH replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.