M-F 8AM-4:30PM CT
1-800-582-8828
> >>EHR
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA

Ushio EHR - 1000293

EHR
Ushio
Lamp EHR (JPD120V-400WG)
Description 120V 400W RSC (R7s) Clear
Brand Ushio
MPN 1000293
UPC 048777119044

$14.10

In Stock

The EHR Ushio 1000293 is a Halogen T4 120V 400W Lamp with a R7s base.
Specifications for the 1000293 Ushio EHR Replacement Lamp
GENERAL CHARACTERISTICS
Shape T4
Lamp Base R7s (Recessed Single Contact)
Filament CC-8
Bulb Finish Clear
Rated Life 2000 hours
Operating Position Universal
PHOTOMETRIC CHARACTERISTICS
Initial Lumens 7750
Color Temperature 2900 K
ELECTRICAL CHARACTERISTICS
Watts 400 W
Volts 120 V
DIMENSIONS
Maximum Overall Length - MOL 3.16in (80.30mm)
Diameter 0.59in (15.00mm)
PRODUCT INFORMATION
Product Code 1000293
Family Name Ushio JPD Series Double Ended Quartz Halogen Lamps
Description EHR
Ordering Code JPD120V-400WG
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 50
Sales Unit Each
UPC 048777119044
Ushio EHR 1000293 Replacement Bulb Applications & Features

Applications

  • Stage Studio


Features

  • Ushio EHR (JPD120V-400WG) Halogen Bulb
  • Double Ended Lamp
  • Only for Use in Approved Enclosed Halogen Fixtures
Ushio EHR 1000293 Replacement Lamp

Equipment

  • Altman Q-Lite Jr
EHR Ushio Halogen Lamp

  • DANGER! The Ushio EHR JPD120V-400WG replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio EHR replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JPD120V-400WG EHR Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio EHR bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EHR Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio EHR lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EHR lamp.
  • Affix the EHR Ushio replacement lamp securely in the socket. Improper installation of the Ushio EHR replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio EHR lamp seal below 350C.
  • Keep the temperature of the EHR Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio EHR JPD120V-400WG lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio EHR replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio EHR JPD120V-400WG replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.