M-F 8AM-4:30PM CT
1-800-582-8828
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA


Ushio EJM - 1000301

Ushio
Lamp EJM (JCR21V-150W)
Description 21V 150W 2-Pin (GX5.3) MR16
Brand Ushio
MPN 1000301
UPC 048777119600

$14.39

In Stock

The EJM Ushio 1000301 is a Halogen MR16 21V 150W Lamp with a GX5.3 base.
Specifications for the 1000301 Ushio EJM Replacement Lamp
GENERAL CHARACTERISTICS
Shape MR16
Lamp Base GX5.3 (2-Pin, Round Pins)
Filament CC-6
Bulb Finish Clear
Rated Life 40 hours
Operating Position BD/Hor
PHOTOMETRIC CHARACTERISTICS
Color Temperature 3400 K
ELECTRICAL CHARACTERISTICS
Watts 150 W
Volts 21 V
DIMENSIONS
Maximum Overall Length - MOL 1.75in (44.50mm)
Diameter 2.00in (50.80mm)
PRODUCT INFORMATION
Product Code 1000301
Family Name Ushio JCR Series MR-16 Tungsten Halogen Lamps
Description EJM
Ordering Code JCR21V-150W
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 10
Sales Unit Each
UPC 048777119600
Ushio EJM 1000301 Replacement Bulb Applications & Features

Applications

  • Dental
  • Projection


Features

  • Ushio EJM (JCR21V-150W) Halogen Bulb
  • MR16 Lamp
  • Dichroic Coated Reflector
  • Focused Beam for Optical Applications
  • Only for Use in Approved Enclosed Halogen Fixtures
Ushio EJM 1000301 Replacement Lamp

Equipment

  • Kerr 15512 Command Light
EJM Ushio Halogen Lamp

  • DANGER! The Ushio EJM JCR21V-150W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio EJM replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JCR21V-150W EJM Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio EJM bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EJM Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio EJM lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EJM lamp.
  • Affix the EJM Ushio replacement lamp securely in the socket. Improper installation of the Ushio EJM replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio EJM lamp seal below 350C.
  • Keep the temperature of the EJM Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio EJM JCR21V-150W lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio EJM replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio EJM JCR21V-150W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.