M-F 8AM-4:30PM CT
1-800-582-8828
> >>EKE/L
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA

Ushio EKE/L - 1003370

EKE/L
Ushio
Lamp EKE/L (JCR21V-150W 10H/5)
Description 21V 150W 2-Pin (GX5.3) MR16
Brand Ushio
MPN 1003370
UPC 048777443217

$11.97

In Stock

The EKE/L Ushio 1003370 is a Halogen MR16 21V 150W Lamp with a GX5.3 base.
Specifications for the 1003370 Ushio EKE/L Replacement Lamp
GENERAL CHARACTERISTICS
Shape MR16
Lamp Base GX5.3 (2-Pin, Round Pins)
Filament CC-6
Bulb Finish Clear
Rated Life 1000 hours
Operating Position BD/Hor
PHOTOMETRIC CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
Watts 150 W
Volts 21 V
DIMENSIONS
Maximum Overall Length - MOL 1.75in (44.50mm)
Diameter 2.00in (50.80mm)
PRODUCT INFORMATION
Product Code 1003370
Family Name Ushio JCR Series MR-16 Tungsten Halogen Lamps
Description EKE/L
Ordering Code JCR21V-150W 10H/5
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 10
Sales Unit Each
UPC 048777443217
Ushio EKE/L 1003370 Replacement Bulb Applications & Features

Applications

  • Fiber Optics
  • 8mm Projection


Features

  • Ushio EKE-L (JCR21V-150W 10H/5) Halogen Bulb
  • MR16 Lamp
  • Dichroic Coated Reflector
  • Focused Beam for Optical Applications
  • Only for Use in Approved Enclosed Halogen Fixtures
EKE/L Ushio Halogen Lamp

  • DANGER! The Ushio EKE/L JCR21V-150W 10H/5 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio EKE/L replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JCR21V-150W 10H/5 EKE/L Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio EKE/L bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the EKE/L Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio EKE/L lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio EKE/L lamp.
  • Affix the EKE/L Ushio replacement lamp securely in the socket. Improper installation of the Ushio EKE/L replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio EKE/L lamp seal below 350C.
  • Keep the temperature of the EKE/L Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio EKE/L JCR21V-150W 10H/5 lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio EKE/L replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio EKE/L JCR21V-150W 10H/5 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.