M-F 8AM-4:30PM CT
1-800-582-8828
> >>ETH
ShopperApproved
Click for the BBB Business Review of this Lights Bulbs & Tubes in Mount Pleasant IA

Ushio ETH - 1000378

ETH
Ushio
Lamp ETH (JCV120V-150WGSNF)
Description 120V 150W Mini Can (E11) Frost
Brand Ushio
MPN 1000378
UPC 048777124789

$12.29

In Stock

The ETH Ushio 1000378 is a Halogen T4 120V 150W Lamp with an E11 base.
Specifications for the 1000378 Ushio ETH Replacement Lamp
GENERAL CHARACTERISTICS
Shape T4
Lamp Base E11 (Mini Candelabra Screw)
Filament CC-8
Bulb Finish Frost
Rated Life 2000 hours
Light Center Length - LCL 1.38in (35.00mm)
Operating Position Universal
PHOTOMETRIC CHARACTERISTICS
Initial Lumens 2700
Color Temperature 2900 K
ELECTRICAL CHARACTERISTICS
Watts 150 W
Volts 120 V
DIMENSIONS
Maximum Overall Length - MOL 2.80in (71.00mm)
Diameter 0.51in (13.00mm)
PRODUCT INFORMATION
Product Code 1000378
Family Name Ushio JCV Series Single Ended Screw Base Tungsten Halogen Lamps
Description ETH
Ordering Code JCV120V-150WGSNF
SKU Qty 1
Case Qty (Price Listed is Per Bulb) 10
Sales Unit Each
UPC 048777124789
Ushio ETH 1000378 Replacement Bulb Applications & Features

Applications

  • Studio


Features

  • Ushio ETH (JCV120V-150WGSNF) Frosted Halogen Bulb
  • Single Ended Lamp
  • Replacement Lamp for Modeling Light
  • Only for Use in Approved Enclosed Halogen Fixtures
ETH Ushio Halogen Lamp

  • DANGER! The Ushio ETH JCV120V-150WGSNF replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
  • Only use the Ushio ETH replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
  • Do not use the JCV120V-150WGSNF ETH Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
  • Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
  • Do not touch the Ushio ETH bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
  • Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the ETH Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
  • Never touch the Ushio ETH lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
  • Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
  • Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio ETH lamp.
  • Affix the ETH Ushio replacement lamp securely in the socket. Improper installation of the Ushio ETH replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
  • Keep the temperature of the Ushio ETH lamp seal below 350C.
  • Keep the temperature of the ETH Ushio replacement lamp wall above 250C.
  • Keep the temperature of the Ushio ETH JCV120V-150WGSNF lamp wall below 800C.
  • Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
  • Ushio ETH replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
  • Operate the Ushio ETH JCV120V-150WGSNF replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
  • Use an external fuse when required.
  • Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.