Ushio FCS - 1000492

Applications

• Dental
• Fiber Optic
• Medical
• Microscope
• Projection
• Surgical

Features

• Ushio FCS (JC24V-150WUI) Halogen Bulb
• Single Ended Lamp
• Low Voltage Bulb
• Replacement for ZB-FCS
• Replacement Lamp for Dental - Examination & Operating
• Replacement Lamp for Fiber Optic - Illuminator
• Replacement Lamp for Medical - X-Ray Collimator
• Replacement Lamp for Microscope - Illuminator
• Replacement Lamp for Surgical - Operating Room
• Only for Use in Approved Enclosed Halogen Fixtures

Equipment

• A-Dec Cascade Lite
• American DJ Reflex 300
• Eurodent Illuminator
• Faro Sunlight 70 Original
• J Morita Illuminator
• Knight Mfg Model L
• Leica 037-717 Microscope
• Leica 501-109 Microscope
• Leica 799-892 Microscope
• Leica PP500 Microscope
• Leica Pradolux 25
• Leica Pradovit Color Auto Focus
• Leica TP201 Microscope
• Nikon 16D Microscope
• Nikon 20A Microscope
• Nikon 24B Microscope
• Nikon 6C2 Microscope
• Nikon 71826 Microscope
• Nikon V16C Microscope
• Olympus 58101 Microscope
• Planmeca Delight
• Siemens A1 Sirona
• Siemens E1 Sirona
• Swift MA786 Microscope

Entertainment

• American DJ 150 Image Projector
• Techni-Lux Frisby (EL-ML408-ML)
• Techni-Lux Macarena (EL-ML310-ML)
• Techni-Lux Trilly Moonflower (EL-ML414-ML)
• Visual Effects V-9526 Orbitron II
• Visual Effects V-9882 Double Dazzler

• DANGER! The Ushio FCS JC24V-150WUI replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Ushio FCS replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the JC24V-150WUI FCS Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Ushio FCS bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the FCS Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Ushio FCS lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio FCS lamp.
• Affix the FCS Ushio replacement lamp securely in the socket. Improper installation of the Ushio FCS replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Ushio FCS lamp seal below 350C.
• Keep the temperature of the FCS Ushio replacement lamp wall above 250C.
• Keep the temperature of the Ushio FCS JC24V-150WUI lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Ushio FCS replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Ushio FCS JC24V-150WUI replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.