Ushio FLK/LL - 1002196

Applications

• Stage Studio
• Theatre
• TV
• Video

Features

• Ushio FLK-LL (JCV115V-575WBM) HX-601 Halogen Bulb
• Single Ended Lamp
• Ceramic Base
• Replacement for ZB-HX601
• Replacement for ZB-601
• Only for Use in Approved Enclosed Halogen Fixtures

Equipment

• Altman Shakespeare S6-5 Ellipsoidal
• Altman 360Q 6x12 Ellipsoidal
• Altman Shakespeare S6-10 Ellipsoidal
• Altman Shakespeare S6-20 Ellipsoidal
• Altman Shakespeare S6-30 Ellipsoidal
• Altman Shakespeare S6-40 Ellipsoidal
• Altman Shakespeare S6-05 Ellipsoidal
• Altman SP-A (StarPar)
• Altman OD-600-A (Outdoor Quartz Pars)

• DANGER! The Ushio FLK/LL JCV115V-575WBM HX-601 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
• Only use the Ushio FLK/LL replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
• Do not use the JCV115V-575WBM HX-601 FLK/LL Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
• Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
• Do not touch the Ushio FLK/LL bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
• Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the FLK/LL Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
• Never touch the Ushio FLK/LL lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
• Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
• Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio FLK/LL lamp.
• Affix the FLK/LL Ushio replacement lamp securely in the socket. Improper installation of the Ushio FLK/LL replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
• Keep the temperature of the Ushio FLK/LL lamp seal below 350C.
• Keep the temperature of the FLK/LL Ushio replacement lamp wall above 250C.
• Keep the temperature of the Ushio FLK/LL JCV115V-575WBM HX-601 lamp wall below 800C.
• Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
• Ushio FLK/LL replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
• Operate the Ushio FLK/LL JCV115V-575WBM HX-601 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
• Use an external fuse when required.
• Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.