M-F 8AM-4:30PM CT
1-800-582-8828
Ushio FTD - 1000621
| Lamp | FTD (JDR/M12V-20W/G/FL30) |
| Description | 12V 20W Mini 2-Pin (GZ4) 30° MR11 |
| Brand | Ushio |
| MPN | 1000621 |
| UPC | 048777140673 |
The FTD Ushio 1000621 is a Halogen MR11 12V 20W Lamp with a GZ4 base.
Specifications for the 1000621 Ushio FTD Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | MR11 |
| Lamp Base | GZ4 (Miniature 2-Pin) |
| Bulb Finish | Clear |
| Rated Life | 2000 hours |
| Operating Position | Universal |
| PHOTOMETRIC CHARACTERISTICS | |
| Beam Spread | 30° |
| Beam Type | Flood |
| Color Temperature | 2925 K |
| Candle Power (CP) | 600 |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 20 W |
| Volts | 12 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 1.38in (35.10mm) |
| Diameter | 1.38in (34.90mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000621 |
| Family Name | Ushio MR-11 Series 12V Tungsten Halogen Lamps |
| Description | FTD |
| Ordering Code | JDR/M12V-20W/G/FL30 |
| LIF | M62 |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777140673 |
Ushio FTD 1000621 Replacement Bulb Applications & Features
Applications
- Accent Lighting
- Decorative Lighting
- Display Lighting
- Landscape Lighting
- Low-Voltage Lighting
Features
- Ushio FTD (JDR/M12V-20W/G/FL30) Halogen Bulb
- MR11 Lamp
- Flood 30 Degrees
- Faceted Dichroic Coated Reflector
- Only for Use in Approved Enclosed Halogen Fixtures
- Cool-Lux LUX-010
FTD Ushio Halogen Lamp
- DANGER! The Ushio FTD JDR/M12V-20W/G/FL30 replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio FTD replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JDR/M12V-20W/G/FL30 FTD Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio FTD bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the FTD Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio FTD lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio FTD lamp.
- Affix the FTD Ushio replacement lamp securely in the socket. Improper installation of the Ushio FTD replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio FTD lamp seal below 350C.
- Keep the temperature of the FTD Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio FTD JDR/M12V-20W/G/FL30 lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio FTD replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio FTD JDR/M12V-20W/G/FL30 replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.