M-F 8AM-4:30PM CT
1-800-582-8828
Ushio FTK - 1000629
| Lamp | FTK (JCD120V-500WCT) |
| Description | 120V 500W 2-Pin Pf (GY9.5) Clear |
| Brand | Ushio |
| MPN | 1000629 |
| UPC | 048777141236 |
The FTK Ushio 1000629 is a Halogen G7 120V 500W Lamp with a GY9.5 base.
Specifications for the 1000629 Ushio FTK Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | G7 |
| Lamp Base | GY9.5 (2-Pin Prefocus) |
| Filament | CC-6 |
| Bulb Finish | Clear |
| Rated Life | 200 hours |
| Light Center Length - LCL | 1.44in (36.50mm) |
| Operating Position | BD/Hor |
| PHOTOMETRIC CHARACTERISTICS | |
| Initial Lumens | 13500 |
| Color Temperature | 3100 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 500 W |
| Volts | 120 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 2.57in (65.30mm) |
| Diameter | 0.87in (22.00mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000629 |
| Family Name | Ushio JCD Series Halogen Bi-Pin SSTV & AV Lamps |
| Description | FTK |
| Ordering Code | JCD120V-500WCT |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777141236 |
Ushio FTK 1000629 Replacement Bulb Applications & Features
Applications
- Stage Studio
Features
- Ushio FTK (JCD120V-500WCT) Halogen Bulb
- Single Ended Lamp
- For Use in Approved Enclosed Halogen Fixture
Ushio FTK 1000629 Replacement Lamp
Equipment
- Raykit PAR56/64
- Lowel Omni Light
FTK Ushio Halogen Lamp
- DANGER! The Ushio FTK JCD120V-500WCT replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio FTK replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JCD120V-500WCT FTK Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio FTK bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the FTK Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio FTK lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio FTK lamp.
- Affix the FTK Ushio replacement lamp securely in the socket. Improper installation of the Ushio FTK replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio FTK lamp seal below 350C.
- Keep the temperature of the FTK Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio FTK JCD120V-500WCT lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio FTK replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio FTK JCD120V-500WCT replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.