M-F 8AM-4:30PM CT
1-800-582-8828
Ushio FXL - 1000636
| Lamp | FXL (JCR82V-410W) |
| Description | 82V 410W Mini 2-Pin (GY5.3) MR16 |
| Brand | Ushio |
| MPN | 1000636 |
| UPC | 048777141724 |
The FXL Ushio 1000636 is a Halogen MR16 82V 410W Lamp with a GY5.3 base.
Specifications for the 1000636 Ushio FXL Replacement Lamp
| GENERAL CHARACTERISTICS | |
| Shape | MR16 |
| Lamp Base | GY5.3 (Miniature 2-Pin, Flat Pins) |
| Filament | CC-8 |
| Bulb Finish | Clear |
| Rated Life | 75 hours |
| Operating Position | BD/Hor |
| PHOTOMETRIC CHARACTERISTICS | |
| Color Temperature | 3300 K |
| ELECTRICAL CHARACTERISTICS | |
| Watts | 410 W |
| Volts | 82 V |
| DIMENSIONS | |
| Maximum Overall Length - MOL | 1.75in (44.50mm) |
| Diameter | 2.00in (50.80mm) |
| PRODUCT INFORMATION | |
| Product Code | 1000636 |
| Family Name | Ushio JCR Series MR-16 Tungsten Halogen Lamps |
| Description | FXL |
| Ordering Code | JCR82V-410W |
| SKU Qty | 1 |
| Case Qty (Price Listed is Per Bulb) | 10 |
| Sales Unit | Each |
| UPC | 048777141724 |
Ushio FXL 1000636 Replacement Bulb Applications & Features
Applications
- Projection
Features
- Ushio FXL (JCR82V-410W) Halogen Bulb
- MR16 Lamp
- Dichroic Coated Reflector
- Focused Beam for Optical Applications
- Only for Use in Approved Enclosed Halogen Fixtures
Ushio FXL 1000636 Replacement Lamp
Equipment
- Altman Luminator Followspots
- Altman Comet Followspots
FXL Ushio Halogen Lamp
- DANGER! The Ushio FXL JCR82V-410W replacement lamp operates at extremely high temperatures that can cause serious physical injuries and property damage.
- Only use the Ushio FXL replacement lamp in Halogen-approved fixtures. Fixtures should fully contain any parts of the Halogen lamp upon the event of a lamp burst.
- Do not use the JCR82V-410W FXL Ushio replacement lamp in close proximity of paper, cloth or other combustible materials that can cause a fire hazard.
- Lamps are very fragile. Do not drop, crush, bend or shake them. Vibration or impact will cause filament breakage and short lamp life.
- Do not touch the Ushio FXL bulb surface or inside reflectors with your bare hands. Oils from skin can lead to breakage or shorten the life of the lamp. Use clean gloves or lint-free cloth for installation and removal.
- Clean any dirt, oil, or lint away from the bulb with alcohol and a lint-free cloth or tissue. Any foreign particles or materials on the FXL Ushio replacement bulb surface can cause hot spots on the bulb and result in lamp failure.
- Never touch the Ushio FXL lamp when it is on, or soon after it has been turned off, as it is hot and may cause serious burns.
- Do not look directly at the operating bulb for any period of time; this may cause serious eye injury.
- Always turn off the electrical power before inserting, removing, or cleaning the replacement Ushio FXL lamp.
- Affix the FXL Ushio replacement lamp securely in the socket. Improper installation of the Ushio FXL replacement lamp will cause electrical arcing, overheating and short life to lamp and socket. Replace lamp holders and sockets when necessary.
- Keep the temperature of the Ushio FXL lamp seal below 350C.
- Keep the temperature of the FXL Ushio replacement lamp wall above 250C.
- Keep the temperature of the Ushio FXL JCR82V-410W lamp wall below 800C.
- Make sure lamps of specified wattage and voltage are only used in appropriately rated fixtures. Unspecified use will lead to short lamp life, breakage and overheating of fixture.
- Ushio FXL replacement lamps should not be operated beyond the total rated voltage. Avoid the use of dimmers that may drive your lamp over its rated voltage.
- Operate the Ushio FXL JCR82V-410W replacement lamp only in the indicated burn position. Failure to do so will lead to overheating and shortened lamp life.
- Use an external fuse when required.
- Do not allow one lamp to directly expose another. This may lead to overheating and shortened lamp life.